Ramblin' Dan's Workshop Blog
Welcome! Blog pages are intended for two way dialog with the author of the posts presented. Readers are encouraged to participate in this expression of thoughts and ideas. Guest comments are welcome. Personal emails are never published. You don't need to register to post a comment although you can join to subscribe to the blog and receive email notifications of new posts. Registering does not enable personal posting of new topics.
This blog replaces the original function and intention of the Shop Notes Menu tab. Shop notes will remain available and may be used occasionally for high priority topics. The blog format is friendlier and encourages reader feedback if desired. This is the place where new projects and updates will first appear.
Ramblin' Dan's Workshop Blog
Update to Wax Carving Bench
I just added a few more pictures and updated the Wax Carving Post in the TOOLS section. I installed a Foredom tool hanger on the right side. The base bracket is too large to fit on the top edge and there was no existing place on the side that was suitable.
I created a new bracket from a 1x4x18 in red oak board, obtained S4S from Lowes. I mounted it low enough that I could still adjust the leg bolts or remove them if I needed. I also mounted an outlet strip on the board. Take a look at the update HERE.
.
Comments
By accepting you will be accessing a service provided by a third-party external to https://workshop.ramblindan.org/jla/