Ramblin' Dan's Workshop

The Sanctum of Fine Art and Invention

Ramblin' Dan's Workshop Blog

Welcome! Blog pages are intended for two way dialog with the author of the posts presented. Readers are encouraged to participate in this expression of thoughts and ideas. Guest comments are welcome. Personal emails are never published. You don't need to register to post a comment although you can join to subscribe to the blog and receive email notifications of new posts. Registering does not enable personal posting of new topics.

This blog replaces the original function and intention of the Shop Notes Menu tab. Shop notes will remain available and may be used occasionally for high priority topics. The blog format is friendlier and encourages reader feedback if desired. This is the place where new projects and updates will first appear.

Comments from Dan...

----------------------------------------------------

My CNC Wax Mill

This is my newer Taig CNC mill that I have set up for doing 4 axis wax carving.  I am standing in a narrow isle between the HB2 gantry CNC machine to my left (picture right) and the Taig mill. The taig has run several projects and has about 8 hours run time. The spindle bearings are actual...b2ap3_thumbnail_DSC06104.jpg
Continue reading
  2416 Hits
  0 Comment
Tags:
2416 Hits
0 Comment

Hydrogen Torch System

I have taken a “squint” at what is sometimes called a water torch for use in my jewelry work. It is a rather simple water electrolysis system that creates a mix of hydrogen and oxygen that is fed to the torch tip in a single hose. The technology has been around since the very early 1800’s so it is n...b2ap3_thumbnail_500187.jpg
Continue reading
  2300 Hits
  0 Comment
Tags:
2300 Hits
0 Comment

Soup in the Can

I have been wax carving up a storm. Now the "greens" are in the can. Next step is fill the cans with investment, then pop them all into the oven for a good bake. Takes about 12 hours with a max temperature around 1250 degrees. That cooks them good. I have a couple of more carvings but I have limited...b2ap3_thumbnail_DSC06045.jpg
b2ap3_thumbnail_DSC06046.jpg
Continue reading
  2885 Hits
  0 Comment
Tags:
2885 Hits
0 Comment

MAKE Something

I just posted a short article under SHOP NOTES in the main website. It's titled: MAKER - Why Not DIY?. Click on the link and it will open to a new page. This is response to the many folks who are begging then crying (at least to themselves) about the cost of outsourcing a prototype or one-off c...
Continue reading
  2087 Hits
  0 Comment
Tags:
2087 Hits
0 Comment

Wax Carving Taig Mill CNC

  I am setting up my number 2 Taig CNC mill especially for three and 4 axis wax machining. This mill is brand new and has never run a real project. Since wax machining does not require water or mist cooling, I am setting it up in a dry enclosure with no need to be concerned with moisture contro...b2ap3_thumbnail_DSC05978-32.jpg
Continue reading
  2335 Hits
  0 Comment
2335 Hits
0 Comment

By accepting you will be accessing a service provided by a third-party external to https://workshop.ramblindan.org/jla/

Copyright © TEDatum Publishing 2018. All Rights Reserved.